Table of Contents
Advertisement
Item
Channel used
Communications speed
Reception level
Noise level
Target level
StoredPC
UII (EPC code)
*1. Values outside of the above range may be detected under some conditions.
Scanner
(host device)
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Description
Indicates the channel used when communicating with
an RF Tag.
Indicates the communications speed when communi-
cating with an RF Tag.
Indicates the reception level measured during commu-
nications diagnostics.
*1
-35 to -61 dBm
Indicates the noise level measured during communi-
cations diagnostics.
*1
-35 to -70 dBm
Indicates the target level measured during communi-
cations diagnostics.
0 to 100
Indicates the UII (EPC code) (including the StoredPC
data) of the RF Tag that was communicated with
during communications diagnostics.
Communications command sent.
Response returned.
GET COMMUNICATIONS DIAGNOSTIC INFORMATION
command
Communications diagnostics results returned.
Indicates the channel
selected by a Reader/Writer
when the channel setting is
"Automatic."
Indicates the speed selected
by the Reader/Writer when
the communications speed
setting is "Automatic."
This value is input only in
Focus Mode.
Adopter
(Reader/Writer)
Unstable
communications
TM
) (Z402)
6 Functions
Remarks
6
6 - 43
Advertisement
Table of Contents
