Jabra Elite 2 Quick Start Manual

Jabra Elite 2 - ciemnoszary
How do I pair my Jabra Elite 2 with my mobile device?
To pair your headset with your mobile device or tablet, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press the Left and Right buttons.
The LED light on the right earbud will turn green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LED on the right
earbud flash blue.
The earbuds are now ready to pair with your mobile device.
Note
Even if you want to use just the right earbud, you must still pair both
earbuds with your mobile device. After the pairing, you can place the
left earbuds in the charging case.
4. To pair, go to the Bluetooth menu on your mobile device and select
Jabra Elite 2 from the list. Enter "0000" (four zeros) if you are asked for
a pin code.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
Note
Android users can also use Google Fast Pair to pair their headset with their
https://www.jabra.pl/supportpages/jabra-elite-2/100-91400000-60/faq/48891992-00f4-
4bac-bcfa-f981c3f0f4cd
19/02/2023 21:54
Strona 1 z 2