Tools And Materials Needed - Blomberg BOTR30100B Installation Manual

External exhaust
4
4.4 Tools and materials
needed
# 1 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
Over The Range Convection Microwave Oven / Installation Manual
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Ruler or tape measure and
straight edge
" "
Electric drill with ⁄ , ⁄ and ⁄
3 1 5
16 2 8
drill bits
Stud nderor Hammer (optional)
Level
Carpenter square
(optional)
"
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
13 / 63 EN