Advertisement
Available languages
Available languages
Main burner
Match light
1.
If the burner will not light after several attempts then the burner can be match lit, before using the match
allow 5 minutes for any accumulated gas to dissipate.
2.
Clip a paper match on one end of the lighting rod.
3.
Light match.
4.
Hold lighting rod and insert lighted match right next to the burner ports or ceramic file.
5.
Push and turn the designated control knob to
6.
Burner should ignite immediately.
Lighting Instructions
/HIGH.
10
continued
Sear burner
Advertisement
Chapters
