Advertisement
Installing the Rip Fence
Bar of
Rip Fence
Fence
Lock Knobs
Figure 4
Dust Collector
Figure 5
Work piece and Work Area Set Up
1. Designate a work area that is clean and well-
lit. The work area must not allow access by
children or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
Page 10
Main Guide
of Rip Fence
Dust Port
Dust Blower Lever
For technical questions, please call 1-800-444-3353.
1. Loosen the Fence Lock Knobs.
2. With the main guide of the Rip Fence facing
downward, slide the bar of the Rip Fence
into the slots on the Baseplate until it is
the desired distance from the Blade.
3. Tighten in place with the Fence Lock Knobs.
1. Slide the Dust Blower Lever to the
right to open the Dust Port.
2. Connect a Dust collection
system/bag (sold separately) to the Dust
Port on the back of the Jigsaw.
3. If a dust collection system/bag will not
be used, slide the Dust Blower Lever
to the Left to close the Dust Port.
3. Secure loose work pieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Item 69077
Advertisement
