Table of Contents
Advertisement
348 Wheels and tires
Position jack
2
at jack support point 1.
#
Turn crank
3
clockwise until jack
#
completely on jack support point
base of the jack lies evenly on the ground.
Turn crank
3
until the tire is raised a maxi‐
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Vehicles with AMG ceramic high-perform‐
ance composite braking system:
* NOTE Damage to the ceramic brake disk
when changing a wheel
Mercedes-AMG vehicles with ceramic
brake disks: during removal and reposition‐
ing of the wheel, the wheel rim may strike
the ceramic brake disk and damage it.
Take particular care.
#
Ask another person for assistance or
#
use a second centering pin.
2
sits
1
and the
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
page 348).
* NOTE Damage to threading from dirt on
wheel bolts
page 346).
/
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
Screw alignment bolt
#
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
#
pletely.
Remove the wheel.
#
1
into the thread
Advertisement
Table of Contents
