4. Install the following components:
a)
System board shield
b)
Back cover
c)
Stand
5. Follow the procedure in
WLAN card
Removing the WLAN card
1. Follow the procedure in
2. Remove the following components:
a)
Stand
b)
Back cover
c)
System board shield
3. To remove the WLAN card shield:
a) Unroute the antenna cable from the routing channel [1].
b) Remove the two screws (M2x2.5) that secure the WLAN card shield to the system board [2].
c) Remove the WLAN card shield from the system board [3].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
35