Table of Contents
Advertisement
2. Install the following components:
a)
Speakers
b)
I/O bracket
c)
Base cover
d)
System board shield
e)
Back cover
f)
Stand
3. Follow the procedure in
Microphones
Removing the microphones
1. Follow the procedure in
2. Remove the following components:
a)
Stand
b)
Back cover
c)
System board shield
d)
Base cover
e)
I/O bracket
f)
Speakers
g)
PSU
3. To remove the microphone and cable:
a) Disconnect the microphone module cable from the system board [1].
b) Remove the microphone module cable from the routing guides on the display assembly base [2].
c) Remove the four screws (M2x2.5) that secure the microphone modules to the middle frame [3].
d) Lift the microphone modules off the slots on the middle frame [4].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
73
Advertisement
Table of Contents
