Steps
1. Insert the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the
powered
GPU.
NOTE:
This step is required only if the system is configured with powered GPU.
2. Install the
fan
duct.
3. Install the
side
cover.
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
4. Remove the
powered
NOTE:
This step is required only if the system is configured with powered GPU.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
after working inside your
before working inside your
GPU.
computer.
computer.
Disassembly and reassembly
43