Advertisement
Instruction for Panel Functions
1
COLOR TFT-LCD
11
1.Power--Monitor Power Switch
Push this button to turn on the monitor power supply. Power supply indication-lamp
9 will be turned on. Push this button again to turn off the monitor power supply.
Power supply indication-lamp 9 will be turned off.
2.Digital Quartz Clock
This screen is a digital quartz clock showing time in 12-hour style. AM represents
morning and PM represents afternoon.
3.OPEN-- Monitor auto pop-up button
Push this button to pop up the monitor automatically.
4.
Brightness/Color Decreasing Button
When choosing to adjust brightness, push this button to decrease brightness. When
choosing to adjust color, push this button to decrease color level.
5.
Brightness/Color Button
Push this button to adjust brightness and color. The color indication lamp 12 on
the front face of the screen and the brightness indication lamp 13 will change
correspondingly.
6.
Brightness/Color Increasing Button
When choosing to adjust brightness, push this button to increase brightness. When
choosing to adjust color, push this button to increase color level.
7.
VIDEO INPUT CHANGE- video input switch
This monitor can be connected with two video devices. AV1 is video for video
equipment such as VCD. Av2 is environmental image of the rear of the car when
reversing. Push these two buttons can switch between these two different video
input connected with the monitor. When AV1 button is pushed, lamp 10 will be
lightened. When AV2 button is pushed, lamp 8 will be lightened.
11.
Clock Adjusting Button
Push the
button while this button is pushed to adjust the minute. Every push
will give one minute advance; Push the
adjust the hour. Every push will give one hour advance.
2
Ａ Ｖ １ １
Ａ Ｖ
Ａ Ｖ ２ ２
Ａ Ｖ
Ａ Ｖ１ １
Ａ Ｖ
9
8
10
IN DASH MONITOR
Ａ Ｖ２ ２
Ａ Ｖ
7
5
6
button while this button is pushed to
3
Front the face
of the screen
ＳＥＬＥＣＴ
ＳＥＬＥＣＴ
ＳＥＬＥＣＴ
ＳＥＬＥＣＴ
4
12
Color lamp
13
Brightness lamp
Advertisement
