Download Print this page
Pyle PLVSHR6 Operating Instructions Manual

Pyle PLVSHR6 Operating Instructions Manual

6 tft lcd color monitor

Advertisement

Quick Links

6 TFT LCD COLOR MONITOR
OPERATING INSTRUCTIONS
Before operating this set, please read these instructions completely

Advertisement

loading

Summary of Contents for Pyle PLVSHR6

  • Page 1 6 TFT LCD COLOR MONITOR OPERATING INSTRUCTIONS Before operating this set, please read these instructions completely...
  • Page 2: Special Hints

    LCD COLOR MONITOR OPERATING INSTRUCTIONS Congratulations for purchasing our video mobile multimedia products, before connecting, operating or adjusting this products, please read these instructions compactly to make your particular mobile multimedia products to best perform. 1.Do not repair it by yourself, if any trouble occurs, please immediately shuts it off and contact our company or local dealer.
  • Page 3 Control and layout Monitor (1) Adjust Increase (2) Menu (volume, brightness, color, contrast) (3) Adjust Decrease (4) Power on/off (5) Remote sensor (6) Audio out (earplug) (7) Audio / video in (8) Connecting cord Remote Control Power on/off (2) Timer switch (3) Preference switch Adjust Decrease (5) Mute...
  • Page 4 LCD COLOR MONITOR OPERATING INSTRUCTIONS Installation Remote Control replacing batteries PULL OUT 1) Always use new batteries when replacing the old set. 2)Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. 3)Battery replacement is necessary when remote control acts sporadically or stops operating this.
  • Page 5 Operating instructions 1)Press MODE button to select brightness, contrast and volume control, press + or - to adjust correspondent analog. 2) Press PP to select the preset analog. 3) Store your favorite When you have set desired brightness, color, contrast and Volume, press STORE, then press PP, the screen will display STORE PP, press STORE again, STORE in screen will turn into green, the moment analog has been stored, in the future to call out this setting return to the stored state, you only...
  • Page 6 LCD COLOR MONITOR OPERATING INSTRUCTIONS Bracket 1 Bracket 2 for mounting stand style purpose for headrest frame style use purpose Mounting stand Key- for eject the monitor from headrest frame Headrest frame...
  • Page 7 LCD COLOR MONITOR OPERATING INSTRUCTIONS Use bracket 2 for headrest frame style Remove the bracket 2 from the monitor and install bracket 1 as folloes diagram for stand style use Bracket 1 Bracket 2 for mounting stand style purpose for headrest frame style use purpose Use bracket 1 for stand sytle...
  • Page 8 LCD COLOR MONITOR OPERATING INSTRUCTIONS 液晶彩色顯示器使用說明書 Step of install headrest frame Setup work Remove the headrest and set it in an uncluttered work area. Take the appropriate precautions to ensure that it is not damaged during the installation. Measurements Push on the headliner with your fingers to make sure there are no obstructions that would hinder the installation.
  • Page 9 LCD COLOR MONITOR OPERATING INSTRUCTIONS Remove form & obsturctions Carefully peel back the material. Set the adjustable blade to one inch depth and cut around the edges of the hole, staying 1/4 inch inside the edge. Pull up one corner or the foam and use the blade to cut underneath.
  • Page 10 LCD COLOR MONITOR OPERATING INSTRUCTIONS 液晶彩色顯示器使用說明書 Preparing to insert monitor Adjust the bracket pin to 90 , run the cable through the frame as diagram shown and connect it. Inert the monitor Push to insert the monitor to the headrest frame...
  • Page 11 LCD COLOR MONITOR OPERATING INSTRUCTIONS Swivel an angle Push up or down to adjust a suitable angle. Detachable Insert the key between the monitor and headrest frame gap and pull out to remove the monitor from the headrest frame.