Table of Contents
Advertisement
Frequent operation
There are two kinds of file disc play mode:1. No-menu play mode.2.
Menu play mode. The factory default play mode of this unit is no-menu
play mode. Please refer to the description on [SETUP] setting menu for
the information on the switching of play modes.
Attention:
In the first play mode, after a disc is put into the player and the player
While playing, you can
push [PREVIOUS] or [NEXT]
reads the disc, the player will go into [STOP] state and display [STOP]
to play the previous track or
on DVD display panel.
the next one.
At this time, you can press a numerical key to select a file and play the
While playing you can
disc starting with the selected file or press [PLAY] key to play the disc
push [STOP] to back to the
starting with the first file of this disc. This file may be either an MP3 file
menu picture.
or [MPEG] file. When an MP3 is being played, you can press [DISPLAY]
key to view file play time.
Note:1.If you are not quite familiar with thisunitand press [PROG] key
Or select programming function through the menu when the discs
described above are played,error operations will be caused.
2. If your disc contains files of multiple formats, press [STOP] key after
the play of the disc is finished and display the picture that you can`t
usage [UP]or[DOWN ]key controled the menu.But you may press
Previous or Next key to view track numbers in the list on the right side or
directly press a numerical key to select a track to play.
After a JPEG file disc is read out, you can press PLAY key to start
playing.
14
6. System setting
Push [SETUP], the screen will display system setting menu, the
moment you can push [UP], [DOWN] to move the high lighting
band to the desired item, push [ENTER] to display sub-menu. In
the sub-menu push [RIGHT] to enter inferior sub-menu. You can
push [UP], [DOWN] to move the high lighting band in all menu
pictures. Push [ENTER] your selection will be valid. Push [LEFT]
to escape the sub-menu in the right of the screen. Any time push
[SETUP] or [EXIT SETUP] you will escape system setting state.
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
GOTO GENERAL SETUP PAGE
Following are some examples of frequent setting the user can
setting other items following their instructions.
Example 1:Set TV screen ratio mode
1.Push [SETUP] to enable the screen display the system
setting picture, make sure the high lighting band has been
located in GENERAL SETUP push [ENTER], TV screen will
display following picture.
GENERAL PAGE
TV DISPLAY
NORMAL/PS
PIC MODE
NORMAL/LB
ANGLE MARX
WIDE
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
GENERAL SETUP
15
System setting
The high lighting band
indicates current item
The explanation to the
current item
Advertisement
Table of Contents
