Accessory Kit; System Components; Base Adapter - Siemens SIMATIC IPC277G PRO Operating Instructions Manual

Overview

1.3 Accessory kit

1.3 Accessory kit
PRO device
Different device version contains different accessory kit.
Device version
Support arm without extension components
(flange on top)
Support arm and extension components (round
tube)
Pedestal/extension components (flange at
bottom)
1.4

System components

1.4.1

Base adapter

PRO devices of the type "suitable for support arm" or "suitable for stand" can be mounted on a
support arm or stand using the base adapter. Depending on the support arm system used, an
adapter plate may have to be installed in addition (see Accessories (Page 18)).
A base adapter is included with the corresponding PRO devices. The base adapter can also be
ordered separately.
①
②
③
④
⑤
You can find information on mounting the PRO device at Support arm or stand without
extension components (flange on top) (Page 29).
14
Accessory kit
•
•
•
•
•
•
Seal
Cable channel
Mechanical interface to the PRO device
Cover
Mechanical interface to support arm or stand
The base adapter with four M4x12 screws.
Additional documents may be supplied with the accessory kit.
A cover plate with four M4x12 screws in the product package.
Additional documents may be supplied with the accessory kit.
The base adapter with four M4x12 screws.
Additional documents may be supplied with the accessory kit.
Operating Instructions, 02/2022, A5E51373692-AA
SIMATIC IPC277G PRO