Table of Contents
Advertisement
OPERATION
• SELECTING THE FREQUENCY
BAND
At radio mode, press BND/LOU
button (13) shortly to select the desired
band.
The reception band will change in the
following order:
FM1
FM2
• SELECTING STATION
Press
button (17) or
shortly to activate automatic seek
function. Press for several seconds
until "MANUAL" appears on the
display, the manual tuning mode is
selected. If both buttons have not
been pressed for several seconds, they
will return to seek tuning mode and
"AUTO" appears on the display.
• LOCAL/DISTANT
Press LOC button (2) to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. This
function is effect during AUTO SEEK
operation.
• AUTOMATIC MEMORY
STORING & PROGRAM SCANNING
- Automatic memory storing
Press PS/AS/D-AUD button (18) for
several seconds, the radio searches
from the current frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number
button.
- Program scanning
Press PS/AS/D-AUD button (18)
shortly to scan preset station. When
the field strength level is more than
the threshold level of stop level, the
radio is holding at that preset number
for several seconds with release
mute, then searches again.
• STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds, (until
2'nd beeps come out), current station
is stored into the number button.
FM3
AM
button (16)
• MONO/STEREO
Press MON button (1) to select mono
or stereo mode. You can sometimes
improve reception of distant stations
by selecting mono operation.
CD OPERATION
• SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed
side uppermost into the CD
compartment until you feel some
resistance. The CD is drawn into the
drive automatically. CD playback
begins.
If a CD is already inserted in the driver:
Keep pressing MOD button (6)
shortly until the CD mode display
appears.
• SELECTING TRACKS
Press
button (16) or
to move the previous track or the
following track. Track number shows
on display.
Hold
button (16) or
fast reverse or fast forward. CD play
starts from when you release the
button.
• PAUSING PLAYING
Press PAU button (20) to pause CD
player. Press it again to resume play.
• PREVIEWING ALL TRACKS
Press SCN button (21) to play first
several seconds of each track on the
current disc. Press again to stop intro
and listen to track.
• REPEATING THE SAME TRACK
Press RPT button (22) to continuously
repeat the same track. Press it again
to stop repeat.
• PLAYING ALL TRACKS IN RANDOM
Press SHF button (23) to play all
tracks on CD in random order. Press
again to cancel the function.
• EJECTING A DISC
Press
button (4) to stop CD
playing and eject the disc from the
disc slot (5).
10
button (17)
button (17) to
Advertisement
Table of Contents
