When the starting assistance/charging process
is complete:
First, remove the jumper cable/charging
#
cable from ground point
3
pole of the donor battery, then from positive
clamp
2
and the positive pole of the donor
battery. Begin each time with the contacts
on your own vehicle first.
After removing the jumper cable/charging
#
cable, close cover
1
of positive clamp 2.
You can obtain further information on starting
assistance at any qualified specialist workshop.
and the negative
Tow starting or towing away
Permitted towing methods
Mercedes-Benz recommends transporting your
vehicle in the case of a breakdown, rather than
towing it away.
Breakdown assistance 275
* NOTE Damage to the vehicle due to tow‐
ing away incorrectly
Observe the instructions and notes on
#
towing away.