Declaration Of Conformity For Wireless Vehicle Components - Mercedes-Benz S-Class Series 2021 Operator's Manual

30 General notes
the underbody paneling. These materials may
ignite if they come into contact with hot
parts of the exhaust system.
Have the vehicle checked and repaired
#
immediately at a qualified specialist
workshop.
or
If driving safety is impaired while con‐
#
tinuing your journey, pull over and stop
the vehicle immediately, while paying
attention to road and traffic conditions,
and contact a qualified specialist work‐
shop.
Vehicles with a 48 V on-board electrical sys‐
tem (EQ Boost technology)
& DANGER Risk of fatal injury by touching
damaged high-voltage components
Vehicles with a 48 V on-board electrical sys‐
tem contain individual high-voltage compo‐
nents. These high-voltage components are
under high voltage.
If you modify component parts of these high-
voltage components or touch damaged com‐
ponent parts, you may be electrocuted.
High voltage components may be damaged
in an accident, although the damage may not
be visible.
Never perform modifications to compo‐
#
nent parts of high-voltage components.
Never touch damaged component parts
#
of high-voltage components.
Never touch component parts of high-
#
voltage components after an accident.
Vehicles with a 48 V on-board electrical system
contain high voltage components. These compo‐
nents are marked with a high voltage label:
All work on high voltage components must be
carried out at a qualified specialist workshop.
Declaration of conformity for wireless vehi‐
cle components
USA: "Radio based devices of this vehicle com‐
ply with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) These
devices may not cause harmful interference, and
2) These devices must accept any interference
received, including interference that may cause
undesired operation. Changes or modifications
not expressly approved by the party responsible