Using Viqi Virtual Partner; Advanced Call Features; Selective Call (Astro Conventional Only); Receiving A Selective Call - Motorola APX 6000 User Manual

Query
Target Location
7.1.1

Using ViQi Virtual Partner

Prerequisites:
• See ViQi on page 50
• To perform the queries, you are required to log in to CommandCentral. See
CommandCentral (Subsequent
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps
Depending on your query, you can also say the following requests:
• To play the available results, say "Play results".
• To request for more details, say "More details".
• To complete the Virtual Partner session, say "Complete".
7.2

Advanced Call Features

This chapter explains the operations of the call features available in your radio.
7.2.1

Selective Call (ASTRO Conventional Only)

A Selective Call is a call from an individual radio to another individual radio with privacy.
7.2.1.1

Receiving a Selective Call

When and where to use: When you receive a Selective Call, the radio indicates one of the followings:
• You hear two alert tones and the LED lights up solid yellow to indicate the transmitting radio is still
sending signal. The call received icons blinks and the display shows Call received.
• The LED blinks solid green once to indicate the transmitting radio is pending to receive signal.
Examples
"Am I still at the <location>?"
NOTE: ViQi will ask for more information to complete the query.
"Where is <unit name>?"
"Tell me where <unit name> is."
NOTE: ViQi will ask for more information to complete the query.
for the queries supported by this feature.
Login).
step 1
Chapter 7 : Advanced Features
through step 3 when responding to ViQi.
68012001079-JW
Logging In to
51