68012001079-JW
Chapter 7 : Advanced Features
7.23.9
Editing the Coordinates of a Waypoint
When and where to use:
NOTE: You can only edit preprogrammed coordinates of Home and Destination.
Ensure that your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2
or
to Waypoints and press the Menu Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
•
or
to [Home] and press the Menu Select button directly below Optn.
•
or
to [Destination] and press the Menu Select button directly below Optn.
4
or
to Edit location and press the Menu Select button directly below Sel.
The first number blinks.
5 Utilize the following control buttons to select the number/coordinates if required, then press the
Menu Select button directly below Edit to change the number/coordinates.
•
Press to move to the previous number/coordinates.
•
Press to move to the next number/coordinates.
A blinking cursor appears in the Edit Location screen.
6 Utilize the following control buttons or menu to change the number/coordinates if required then
press the Menu Select button directly below Ok once.
•
Press to move one space to the left.
•
Press to move one space to the right.
•
Press the Menu Select button directly below Del to delete any unwanted characters.
•
Press the Menu Select button directly below Cncl to return to the previous screen
7 Press the Menu Select button directly below Ok once complete setting up the new Home or
Destination.
One of the following scenarios occurs:
•
The display shows [Home] Updated and the radio returns to the Waypoints main screen.
•
The display shows [Destination] Updated and the radio returns to the Waypoints main
screen.
7.23.10
Deleting a Single Saved Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
108