Table of Contents
Advertisement
Troubleshooting
WARNING: Before you begin any of the procedures in this section,
follow the
Safety
Self-Test
Your monitor provides a self-test feature that allows you to check if your monitor is
functioning properly. If your monitor and computer are properly connected but the
monitor screen remains dark, run the monitor self-test by performing the following
steps:
1. Turn off both your computer and the monitor.
2. Disconnect all video cables from the monitor. This way, the computer doesn't
have to be involved.
3. Turn on the monitor.
If the monitor is working correctly, it detects that there is no signal and one of the
following message appears. While in self-test mode, the power LED remains white.
Dell P2418HZ
Dell P2418HZ
Instructions.
Dell 27 Monitor
?
No HDMI Cable
The display will go into Standby Mode in 4 minutes
www.dell.com/P2720DC
Dell 27 Monitor
?
No DP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/P2720DC
or
or
Troubleshooting
P2720DC
P2720DC
│
61
Advertisement
Table of Contents
