Dell P2720DCc User Manual page 13

Label Description
1 Power connector Connect the power cable (shipped with your monitor).
2 Security-lock slot Secure your monitor using a security lock (purchased
3 Stand lock
feature
4 HDMI port
5 DisplayPort (in)
6 DisplayPort (out) DP output for MST (multi-stream transport) capable
7 USB Type-C port You can attach the monitor to PC using a USB type C
8 USB 2.0
downstream
ports x 2
Use
separately) to prevent unauthorized movement of your
monitor.
To lock the stand to the monitor using a M3 x 6 mm
screw (screw not included).
Connect your computer with HDMI cable.
Connect your computer with DisplayPort cable
(shipped with your monitor).
monitor. DP 1.1 monitor can only be connected as the
last monitor in the MST chain. To enable MST, refer to
instruction on section
Multi-Stream Transport (MST)
NOTE: Remove the rubber plug when use DP
out port.
cable (shipped with your monitor), to get the monitor
experience as below: support data transmission
speed up to USB 3.1. Display resolution up to 2560
x 1440@60 Hz on Display Port™ 1.2 alternate mode.
Power delivery of 20 V/3.25 A, 15 V/3 A, 9 V/3 A, 5
V/3 A.
NOTE: USB Type-C is not supported on
versions of Windows prior to Windows 10.
Connect your USB device.
NOTE: You can only use this port after you
have connected the USB Type-C cable to
the computer and USB Type-C port on the
monitor.
"Connecting the monitor for DP
function".
About your monitor │ 13