Dell P2720DCc User Manual page 53

If HDMI, DP or USB Type-C cable is not connected, a floating dialog box as shown
below appears. The monitor will enter Standby Mode after 4 minutes if left at this
state.
Dell P2418HZ
Dell P2418HZ
Dell P2418HZ
A message is displayed while the cable supporting DP alternate mode is connected
to the monitor under the following conditions:
∞ When Auto Select for USB-C is set to Prompt for Multiple Inputs.
∞ When the DP cable is connected to the monitor.
Dell 27 Monitor
? No HDMI Cable
The display will go into Standby Mode in 4 minutes
www.dell.com/P2720DC
Dell 27 Monitor
? No DP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/P2720DC
Dell 27 Monitor
? No USB Type-C Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/P2720DC
or
or
Operating your monitor
P2720DC
P2720DC
P2720DC
│ 53