Ip Environment Setup; Accessing The Ip Environment Menu; Configuring The Network Connection - LG ProCentric 55UV560H Commercial Mode Setup Manual

The IP Environment Menu enables you to set up the network
features of the TV. If you intend to create a Master TV Setup for
cloning purposes (see Master TV Setup procedure on pages 40
to 42), all IP Environment settings, with the exception of Network
Setting configuration, may be cloned. Also, with the exception of
Network Setting configuration, the IP Environment settings are
editable (with the Installer Remote) only if the TV is in Pass-through
Mode and read-only when the TV is not in Pass-through Mode.

Accessing the IP Environment Menu

Note: When you enter the IP Environment Menu, the Installer
Menu is exited (all current settings are saved automatically upon
exit). If you are also in the process of updating Installer Menu items,
you may wish to set all items as needed before you access the IP
Environment Menu. Otherwise, after exiting the IP Environment
Menu, you will need to reaccess the Installer Menu to set additional
items.
1. Use the Installer Remote to access the Installer Menu (see
"Accessing the Installer Menu" on page 30 for further information).
2. Navigate to Installer Menu item 119 DATA CHANNEL, and press
2-5-3 + MENU SETTINGS to launch the IP Environment Menu
(see example at right).
Use the Up/Down arrow keys on the Installer Remote to select
the desired menu option and then press OK. Refer to the following
sections for information on each of the IP Environment setup options.
When you have completed your IP Environment configuration
as required, press EXIT or
Environment Menu.

Configuring the Network Connection

This section describes how to set up the TV's wired network
connection.
1. Connect the appropriate cable between the TV and the network.
2. With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Network menu option (if it is
not already selected). Then, press OK.
Note: The TV's MAC address is displayed at the top of the
Network Menu screen and cannot be modified.
206-4326
on the Installer Remote to exit the IP

IP Environment Setup

NETWORK
Network
Pro:Centric
MAC Address
Network Setting
(Continued on next page)
C8:08:E9:40:49:F5
55