Ip Environment Setup; Accessing The Ip Environment Menu; Configuring The Network Connection - LG Pro:Centric 32LT560H Setup Manual

IP Environment Setup (Cont.)
The IP Environment Menu enables you to set up the network features of the TV. If you intend to
create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 35 to
37), all IP Environment settings, with the exception of the network settings, may be cloned.
Note: With the exception of network settings, the IP Environment settings are editable (with the
Installer Remote) only if the TV is in Pass-through Mode and read-only when the TV is not in Pass-
through Mode.

Accessing the IP Environment Menu

Note: When you enter the IP Environment Menu, the Installer Menu is exited (all current settings
are saved automatically upon exit). If you are also in the process of updating Installer Menu
items, you may wish to set all items as needed before you access the IP Environment Menu.
Otherwise, after exiting the IP Environment Menu, you will need to reaccess the Installer Menu
to set additional items.
1. Use the Installer Remote to access the Installer Menu (see "Accessing the Installer Menu" on page
25 for further information).
2. Navigate to Installer Menu item 119 DATA CHANNEL, and press 2-5-3 + MENU SETTINGS to
launch the IP Environment Menu.
Use the Up/Down arrow keys on the Installer Remote to select the desired menu option and
then press OK. Refer to the following sections for information on each of the IP Environment setup
options.
When you have completed your IP Environment configuration as required, press EXIT or
on the Installer Remote to exit the IP Environment Menu.

Configuring the Network Connection

This option enables you to set up the TV's wired network connection.
1. With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Network menu option. Then,
press OK.
Note: The TV's MAC address is displayed on the Network Menu
screen and cannot be modified.
2. Connect the appropriate cable between the TV and the network.
3. With the Network Menu on display, use the arrow keys on
the Installer Remote to select Network Setting. Then, press OK.
A Network Setting window (see example on following page) will
be displayed on the screen.
4. Use the arrow keys on the Installer Remote to select START
CONNECTION and press OK.
50
NETWORK
Network
Pro:Centric
Network Setting
Network Status
MAC Address
C8:08:E9:40:49:F5
(Continued on next page)
206-4339