Ip Environment Setup; Accessing The Ip Environment Menu; Configuring The Network Connection - LG 22LY560M Commercial Mode Setup Manual

Hospital tvs

Hide thumbs Also See for 22LY560M:

Owner's manual (24 pages)

Table Of Contents

Table of Contents

The IP Environment Menu enables you to set up the network features

of the TV. With the exception of Network Connection settings, the IP

Environment settings are editable (with the Installer Remote) only if

the TV is in Pass-through Mode and read-only when the TV is not in

Pass-through Mode. Also, if you intend to create a Master TV Setup

for cloning purposes (using a TLX file—see Master TV Setup

procedure on pages 31 to 35), all IP Environment settings, with the

exception of the Network Connection settings, may be cloned.

Accessing the IP Environment Menu

1. Use the Installer Remote to access the Installer Menu (see

"Accessing the Installer Menu" on page 21 for further information).

2. Navigate to Installer Menu item 119 DATA CHANNEL, and press

2-5-3 + MENU to launch the IP Environment Menu (see example

at right).

Use the Up/Down arrow keys on the Installer Remote to select the

desired menu option and then press OK. Refer to the following

sections for information on each of the IP Environment setup options.

When you have completed your IP Environment configuration

as required, press EXIT or

Environment Menu.

Configuring the Network Connection

This option enables you to set up the TV's wired network connection.

1. With the IP Environment Menu on display, use the arrow

keys on the Installer Remote to select Network Connection.

Then, press OK.

The first of a series of Network Setting windows will be displayed

on the screen.

2. If not already done, connect the appropriate cable between the

TV and the network. Then, use the arrow keys on the Installer

Remote to select Start Connection and press OK.

3. By default, the TV is configured for DHCP. If configured, the

DHCP server will assign an IP address to the TV once the TV

successfully connects to the network, and a "Wired network is

connected" message will be displayed at the top of the next

Network Setting screen (see example at right).

• If no further network configuration is required, use the arrow

keys on the Installer Remote to select Complete and press

OK to return to the IP Environment Menu.

• If a DHCP server is not configured and/or if you wish to set

static IP configuration data for the TV, continue with step 4.

4. Use the arrow keys on the Installer Remote to select Set

Expert from the Network Setting screen, and then press OK.

206-4261

on the Installer Remote to exit the IP

IP Environment