Ip Environment Setup; Accessing The Ip Environment Menu; Network Configuration - LG 65UW660H Commercial Mode Setup Manual

Hide thumbs Also See for 65UW660H:

Owner's manual (92 pages)

Table Of Contents

Table of Contents

The IP Environment Menu enables you to set up the network features of the TV. If you intend to

create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages36

to38), all IP Environment settings, with the exception of Wired Network Connection settings, the

TV name (editable in the Media Share Menu), DIAL, and SoftAP settings, may be cloned.

Note: With the exception of Network Setting configuration, the IP Environment settings are editable

(with the Installer Remote) only if the TV is in Pass-through Mode and read-only when the TV is not in

Pass-through Mode.

Accessing the IP Environment Menu

Note: When you enter the IP Environment Menu, the Installer Menu is exited (all current settings

are saved automatically upon exit). If you are also in the process of updating Installer Menu items,

you may wish to set all items as needed before you access the IP Environment Menu. Otherwise,

after exiting the IP Environment Menu, you will need to reaccess the Installer Menu to set additional

items.

1. Use the Installer Remote to access the Installer Menu (see "Accessing the Installer Menu" on page

26 for further information).

2. Navigate to Installer Menu item 119 DATA CHANNEL, and press 2-5-3 + MENU SETTINGS to

launch the IP Environment Menu.

Use the Up/Down arrow keys on the Installer Remote to select the desired menu option and then

press OK. Refer to the following sections for information on each of the IP Environment setup options.

When you have completed your IP Environment configuration as required, press EXIT or

the Installer Remote to exit the IP Environment Menu.

Network Configuration

This section describes each of the options available in the Network

Menu (see example at right). Refer to the appropriate subsection(s)

on the following pages.

Note: If you intend to use the Wi-Fi Zoning feature with

cloning configuration, you must configure the wireless

network connection as part of the Master TV Setup. See

"Configuring a Wi-Fi Network Connection" on page 53

for further information.

Accessing the Network Menu

With the IP Environment Menu on display, use the arrow keys on the

Installer Remote to select the Network menu option. Then, press

OK.

Note: The TV's MAC address is displayed at the top of the Network

Menu screen and cannot be modified.

206-4297