Table of Contents
Advertisement
Section 3 - Configuration
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Enabling this feature presents additional configuration options.
Assignment
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected to the
DHCP-PD in LAN
LAN interface. This option is only available if the above Enable DHCP-
PD is enabled.
Autoconfiguration
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Type
If you select SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes).The default is
Advertisement
30 minutes.
Lifetime
If you select Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the start IPv6 address for the DHCP server's IPv6 assignment.
Range (Start)
IPv6 Address
Enter the end IPv6 address for the DHCP server's IPv6 assignment.
Range (End)
IPv6 Address
Enter the dynamic IP's retention time. The default is 10080 minutes.
Lifetime
This option is only available if the above Enable DHCP-PD is disabled.
Click Save when you are done.
D-Link M15 User Manual
PPPoE (Continued)
37
Advertisement
Table of Contents
