Table of Contents
Advertisement
Section 3 - Configuration
Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected to
DHCP-PD in LAN
the LAN interface. This option is only available if the above Enable
DHCP-PD is enabled.
Autoconfiguration
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
Type
DHCPv6.
If you select SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes). The default is
Advertisement
30 minutes.
Lifetime
If you select Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the start IPv6 address for the DHCP server's IPv6 assignment.
Range (Start)
IPv6 Address
Enter the end IPv6 address for the DHCP server's IPv6 assignment.
Range (End)
IPv6 Address
Enter the dynamic IP's retention time. The default is 10080 minutes.
Lifetime
This option is only available if the above Enable DHCP-PD is disabled.
D-Link M15 User Manual
30
Advertisement
Table of Contents
