Section 3 - Configuration
Select PPPoE if your ISP requires you to enter a PPPoE username and
password in order to connect to the Internet.
PPPoE Session
Select Create a new session to start a new PPPoE session.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Address Mode
Select Static IP if your ISP assigned you an IP address. In most cases,
select Dynamic IP.
IP Address
If you selected Static IP as the Address Mode, enter the IP address
provided by your ISP.
Service Name
Enter the ISP service name (optional).
Reconnect Mode
Select either Always On or Manual.
MTU
Maximum Transmission Unit (1280~1492) - you may need to change
the MTU for optimal performance with your ISP. The default is 1492
bytes.
D-Link M15 User Manual
PPPoE
35