Advertisement
4
Unpacking the AP
To unpack the access point, follow these steps:
Step 1
Unpack and remove the access point and the mounting accessories, from the shipping box.
Return any packing material to the shipping container and save it for future use.
Step 2
Step 3
Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
The access point
–
Mounting bracket AIR-AP-BRACKET-W2=
–
Torx security screw and mylar label to cover the screw
–
The following accessories can be ordered separately from Cisco:
• Spacer kit AIR-AP1810W-KIT=, includes spacer and RJ-45 jumper cable.
• Cradle kit AIR-OEAP1810-CRD=, includes back cover and RJ-45 jumper cable.
• Cisco local power supply AIR-PWR-D=.
• Physical security kit AIR-SEC-50=, which includes 50 security screws used to secure the access
point onto the wall-mounting bracket, 50 RJ-45 block-out plugs and 2 unlock keys for blocking
physical access to the RJ45 Ethernet ports.
8
Advertisement
