Advertisement
Table 2
LED Status Indications (continued)
Message Type
Operating status
Boot loader warnings
Boot loader errors
Cisco IOS errors
LED State
Blinking Amber
Cycling through Green,
Red and Amber
Rapidly cycling
through Red, Green,
Amber and Off
Blinking Red
Blinking Amber
Red
Blinking Green
Red
Blinking Red and
Amber
Blinking Red and off
Red
Cycling through Red,
Green, Amber and off.
Possible Messages and Meanings
Software upgrade is in progress.
Discovery/join process is in progress.
Access point location command has been
invoked.
Ethernet link is not operational.
Configuration recovery is in progress (Mode
button pushed for 2 to 3 seconds).
Ethernet failure.
Image recovery has been initiated (Mode button
pushed for 20 to 30 seconds).
Image recovery is in progress (Mode button
released after being kept pressed for 20 to 30
seconds).
DRAM memory test failure.
Flash file system failure.
Environment variable failure.
Bad MAC address.
Ethernet failure during image recovery.
Boot environment failure.
No Cisco image file.
Boot failure.
Software failure.
Try disconnecting and reconnecting power to the
AP.
General warning. Insufficient inline power.
Advertisement
