Advertisement
The fasteners you use to mount an access point on a ceiling must be capable of
Caution
maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes
on the mounting bracket.
This product and all interconnected equipment must be installed indoors within the same
Caution
building, including the associated LAN connections as defined by Environment A of the
IEEE 802.af Standard.
The access point is suitable for use in environmental air space in accordance with section
Note
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the
Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power
injector in air handling spaces.
Use only with listed ITE equipment.
Note
4
Unpacking
To unpack the access point, follow these steps:
Unpack and remove the access point and the accessory kit from the shipping box.
Step 1
Return any packing material to the shipping container and save it for future use.
Step 2
Verify that you have received the items listed below. If any item is missing or damaged, contact
Step 3
your Cisco representative or reseller for instructions.
The access point
–
Mounting bracket (selected when you ordered the access point)
–
Adjustable ceiling-rail clip (selected when you ordered the access point)
–
8
Advertisement
