Specifications; Functional Description - Milwaukee M12 48-59-1204 Operator's Manual

Four bay sequential charger, li-ion battery packs
Hide thumbs Also See for M12 48-59-1204:
Table of Contents

Advertisement

Available languages

Available languages

SPECIFICATIONS

Cat. No. ............................................... 48-59-1204
Input Volts ....................................................120 AC
Max Input Amps ............................................1.0 AC
Output Volts .................................................. 12 DC
Max Output Amps ........................................ 3.0 DC
Recommended Ambient
Charging Temperature ................... 40°F to 105°F
M12™ Li-Ion Battery Packs ........................ 12 V DC
FUNCTIONAL
DESCRIPTION
7
4
1. Battery Contacts
2. Release Buttons
3. Cord
4. Bays
5. Vents
6. Skip button
7. Light indicators:
Continuous red:
Continuous green: Charging is complete
Fast flashing red:
Slow flashing red: Battery charge is pending -
Flashing red/green: Damaged or faulty battery
6
7
4
2
Charging
Battery is too hot/cold -
Charging will begin when
battery reaches correct
charging temperature
Charging will begin when the
first pack is fully charged
pack
SYMBOLOGY
BFP
5
MILWAUKEE LI-ION
BATTERY PACKS
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
3
inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
1
cause a short circuit.
Maintenance and Storage
Do not expose your battery pack or cordless tools
to water or rain, or allow them to get wet. This could
damage the tool and battery pack. Do not use oil or
solvents to clean or lubricate your battery pack. The
plastic casing will become brittle and crack, causing
a risk of injury.
Store battery packs at room temperature away from
moisture. Do not store in damp locations where cor-
rosion of terminals may occur. As with other battery
pack types, permanent capacity loss can result if
the pack is stored for long periods of time at high
temperatures (over 120° F). MILWAUKEE Li-Ion
battery packs maintain their charge during storage
longer than other battery pack types. After about a
year of storage, charge the pack as normal.
3
Volts
Direct Current
Alternating Current
Double Insulated
Properly Recycle Batteries
Backfeed Protected
Hertz
Amps
UL Listing for Canada and U.S.
To reduce the risk of fire, personal
injury, and product damage due to

Advertisement

Table of Contents
loading

Table of Contents