Table of Contents
Advertisement
SENSOR WEATHER SHIELD
• The Sensor Weather Shield (sold separately) is designed to
protect your outdoor sensor from rain and snow.
• This shield will offer limited protection from the sun's heat.
• Optional purchase at:
SEARCH FOR OUTDOOR SENSOR
If you are seeing dashes for your outdoor readings, please try the
following steps:
1. Hold the
SEARCH
Reception Indicator
2. If after 3 minutes the sensor still isn't connected, bring the sensor inside
next to the display and remove power from both the sensor and clock.
3. Press any button on the clock 20 times and leave the parts sit for a few
moments with the power off.
4. Install a new set of alkaline batteries into the sensor, then into your clock.
For additional help visit:
5. If your outdoor data is still not appearing after these steps, please
contact our support staff via the links below.
bit.ly/925-1418
button to search for your outdoor sensor. The
bit.ly/basic_restart
will begin to animate.
7
Advertisement
Table of Contents
