Sharp XL-30H Operation Manual page 20

*XL-30H(SUK)P19-P21
Downloaded from: http://www.usersmanualguide.com/
(Continued)
Sleep operation
The radio, compact disc and cassette deck can all
be turned off automatically.
3,5
2
SLEEP
(Main unit operation)
1
Play back the desired sound source.
2
Press the CLOCK/TIMER/SLEEP button repeat-
edly until "SLEEP" is displayed.
3
Within 5 seconds, press the MEMORY/SET
button.
4
Turn the jog dial to set the time.
(Maximum 3 hours - Minimum 5 minutes, 5-
minute intervals)
OFF ↔ 5 minutes .... ↔ 3 hours
5
Press the MEMORY/SET button.
6
The unit will enter the stand-by mode automati-
cally after the preset sleep time has elapsed.
(The volume will gradually decrease one minute
before the preset sleep time expires.)
To confirm the remaining sleep time:
Press the CLOCK/TIMER/SLEEP button three
times.
(Remote control operation)
1
Play back the desired sound source.
2
Press the SLEEP button.
The sleep timer is initially set to 3 hours.
To change the sleep time:
Press the SLEEP button repeatedly to select the
desired sleep time. The time will decrease as fol-
lows.
The amount of sleep time can also be changed
whilst in the sleep mode.
4
3 hours → 2 hours → 1 hour 30 minutes
↑
OFF ← 15 minutes ← 30 minutes ← 1 hour
3
The unit will enter the stand-by mode automati-
cally after the preset sleep time has elapsed.
(The sound volume will be reduced one minute
before the preset sleep time expires.)
To confirm the remaining sleep time:
Press the SLEEP button once.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the stand-
by mode.
Simultaneous sleep and timer op-
eration
1
Prepare for timer playback.
(Perform steps 1 - 6 on page 18.)
2
Press the SLEEP button repeatedly to select
the desired sleep time.
3
Play the desired item (compact disc, tape, etc.).
4
When the preset sleep time has elapsed, the
unit will automatically enter the stand-by mode.
5
When the timer preset time is reached, timer
playback will start.
Caution:
Be sure your tape length is long enough to per-
form both functions.
If you want to go to sleep and wake up listening
to a tape, and the length of the tape is shorter
than the sleep timer setting, timer playback will
not be possible.
19
19
↓
00.2.3, 2:00 PM