Table of Contents
Advertisement
6. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2 when scanning
the cards.
Note: If you do not disable the Detect Double Feed setting and a double feed error occurs, remove
the plastic or laminated card from the input tray and reload it. Press the
to disable the Detect Double Feed feature and scan again. You will need to disable Detect Double
Feed for each scan.
Plastic and Laminated Card Specifications
Parent topic:
Related references
Suggested Tray Positions
Feed Selector Lever
Plastic and Laminated Card Specifications
You can load original plastic and laminated cards that meet these specifications in your scanner. The
feed selector lever must be in the
Paper type
Plastic cards,
embossed (ISO7810
ID-1 compliant)
Plastic cards, standard
(ISO7810 ID-1
compliant)
Laminated cards
Note: Plastic cards with glossy surfaces may not scan properly.
Parent topic:
Loading Originals
position to scan embossed plastic cards or laminated cards.
Paper size
2.1 × 3.3 inches
(54 × 85.6 mm)
4.7 × 5.9 inches (120
× 150 mm) or smaller
Loading Plastic and Laminated Cards in the Input Tray
Paper thickness
0.05 inch (1.24 mm)
maximum
0.03 inch (0.76 mm)
maximum
0.03 inch (0.8 mm)
maximum
68
icon on the main screen
Loading capacity
1 card (vertical)
5 cards (vertical) (in
Normal Mode with the
feed selector in the
(DS-30000) or
(DS-32000) position)
1 card
Advertisement
Table of Contents
