Advertisement
Available languages
Available languages
CAUTION: Always switch off the steamer and allow steamer to cool before attaching/detaching the steam wand,
floorhead, accessories and twin tank. Always stand steamer securely against a wall/fixed structure or lie the steamer
flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on. When using the steam
reach wand do not aim towards electrical components such as light fittings, sockets and wiring.
IMPORTANT: Always check the accessories are clean and free from debris, don't use if damaged, broken or worn.
Using the steam fresh reach wand
Press the steam wand
release pedal and pull
the steam wand and
handheld out of
the floorhead.
To produce steam squeeze
the trigger in short bursts.
Don't hold the trigger
continuously to prevent
over wetting.
Use the arrows to align
the concentration nozzle
to the end of the steam
wand. Push the
concentration tool onto the
steam wand and
twist clockwise to lock
into position.
The Steam Reach wand can be used at different
heights for hard to reach places.
Using your machine
Plug the steamer into
mains and slide the
On/Off switch to on.
The green light will
illuminate when it is ready
to use. The steamer will
automatically set to Max
steam (no detergent).
Press the centre pad
on the control panel
to select preferred
setting steam/detergent.
To improve your comfort,
use the additional
handgrip on the handheld
to support the unit and
help you clean
difficult to
reach areas.
Advertisement
