Advertisement
|ENGLISH|
ASSEMBLY
NOTE:
Always use a torque wrench.
After assembly, with both wheels on the floor, hold both brakes and gently rock the bike forward and backward to make
sure nothing is loose.
A
D
1. Remove securing Velcro strap from assembly (A).
2. Replace extension bar assembly and loosely refit the four fixing bolts. Remove Velcro straps (B).
3. Remove protective spacers. (C).
4. Replace base bars. Tighten all cockpit fixing bolts to 5.5Nm with a 4mm hex (D)
5. Remove protective pads (E).
6. Replace arm cups. Tighten bolts to 4Nm with a 3mm hex (F).
B
E
8
CADEX TRI USER MANUAL
C
F
Advertisement
