Advertisement
|ENGLISH|
3. TRI BAR REMOVAL & ASSEMBLY
REMOVAL
A
D
G
1. Install fork pads
F-R
2. Loosen but don't remove the four cockpit fixing bolts with a 4mm hex key (B).
3. Lift up the extension assembly and detach base bars from both sides. Install protective spacer to the four fixing bolts.
(C).
4. Gently flip down both base bars without putting too much tension on the brake hoses. Gently lay each bar against the
fork leg on the same side. (D).
5. Secure both base bars to the fork legs with the shorter Velcro straps. (E).
6. Secure spacers with Velcro straps. Completely loosen the four cockpit fixing bolts. (F).
7. Flip the assembly down and position it gently against the front of the fork. Secure the entire assembly with the longer
Velcro straps. (G).
B
E
and
F-L
onto the upper part of fork (A).
7
CADEX TRI USER MANUAL
C
F
Advertisement
