Advertisement
|ENGLISH|
NOTE:
1. Always use a torque wrench
2. Once the installation or adjustment has been completed, grab the saddle and rock it back and forth to ensure all
fasteners are snug.
A
C
SADDLE POSITION ADJUSTMENT
1. Loosen the side bolt
2. Adjust saddle angle, fore or aft to preferred position (B).
3. Tighten the top bolt to 5 Nm with 4 mm hex; Tighten the side bolt to 5 Nm with 4 mm hex (C)
4. Double check clamp fixing bolts
B
D
a full turn; Loosen the top bolt
➌
(D)
➌
a full turn (A)
15
CADEX TRI USER MANUAL
Advertisement
