Olivetti JS-670 Service Manual page 30

3LC-1
Maintenance
item No.
Limiting job separator output
U233
Description
Sets a limit of number of output pages from the job separator.
Purpose
Settings may be modified if curled paper is output from the job separator.
Setting
1. Press the start key.
2. Select the mode.
Display
MODE0
MODE1
MODE2
Initial setting: MODE0
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Setting the ejection restriction
U342
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select [ON] or [OFF].
Display
ON
OFF
Initial setting: ON
Details of restriction (number of sheets to be ejected continuously after the start key is pressed)
Condition
When no optional ejection device is installed
When the job separator is installed
When the finisher is installed
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-12
Description
Description
All sizes: 100 sheets
A3 and Ledger sizes: 70, other sizes: 100
A3 and Ledger sizes: 50, other sizes: 100
Description
Sets restriction on the number of sheets
Cancels restriction on the number of sheets
Service Manual
Number of sheets
250 sheets
150 sheets
100 sheets
Y108701-1