Nvidia DGX A100 Service Manual page 75

8. Install the motherboard tray lid and then install the motherboard tray.
Refer to the instructions in the section
9. Connect all cables back into the network card ports.
10. Power on the system and log in.
11. Confirm that the system is healthy.
$ sudo nvsm show health
There should be no new alerts listed.
Verify that the firmware is up to date according to the instructions in
Card Firmware.
14.4. Replacing the Horizontal Network Card
NVIDIA DGX A100 Service Manual
Replacing the Motherboard Tray.
Updating the Mellanox Network
69