Nvidia DGX A100 Service Manual page 49
Hide thumbs
Also See for DGX A100:
- User manual (120 pages) ,
- Service manual (81 pages) ,
- User manual (115 pages)
Table of Contents
Advertisement
4.
Pull the drive to disconnect from the connector on the riser board, then insert the new drive
into the connector on the riser board.
5.
Place the drive against the card and secure by tightening the screw using a Phillips #1 screw-
driver.
9.
Install the assembled module on the motherboard by inserting the riser card in its slot.
10.3. Replacing the M.2 NVMe Drive
NVIDIA DGX A100 Service Manual
43
Advertisement
Table of Contents
