1.
Push the lever release button (on the right side of the lever) to unlock the lever.
2.
Pull the lever to remove the module.
3.
Unlock the release lever and then slide the drive into the slot until the front face is flush
with the other drives.
4.
Close the lever and lock it in place.
6.
Install the new NVMe drives in slots 4, 5, 6, and 7.
1.
Unlock the release lever and then slide the drive into the slot until the front face is flush
with the other drives.
2.
Close the lever and lock it in place.
6.3. Installing the Optional NVMe Drives
NVIDIA DGX A100 Service Manual
27