Cisco Nexus 9504 Hardware Installation Manual page 86

Aci-mode switch

Hide thumbs Also See for Nexus 9504:

Table of Contents

Installing or Replacing a 3-kW DC Power Supply

3. Slide the handle on the middle of the release lever toward the end of the lever and rotate the lever away from the

front of the power supply. Push the power supply all the way into the slot. See the following figure.

Slide and hold the middle handle next to the outer

handle.

Fully rotate the release lever away from the front

of the module.

Cisco Nexus 9504 ACI-Mode Switch Hardware Installation Guide

Replacing or Installing Modules, Fan Trays, and Power Supplies

Rotate the lever toward the front of the module.

Make sure that the other end of the lever grabs the

front of the chassis to push the module onto the

connectors inside the slot.

Table of Contents