IBM eServer 260 Series Installation Manual page 36

2. Move the cover-release latch to the open (up) position.
3. Insert the bottom tabs of the cover into the matching slots in the server chassis.
4. Close the cover-release latch to pull the cover forward and lock the cover in
Installing the bezel
To install the bezel, complete the following steps.
1. Insert the two tabs on the bottom of the bezel into the matching holes on the
2. Push the top of the bezel toward the server until the locking tabs at the top of
24
IBM xSeries 260 Type 8865: Installation Guide
Top cover
place.
server chassis.
the bezel snap into place.
Cover release
latch