To Configure The Trigger Out Smb Port (All Processors); Trigger Out Smb Port Behavior - Agilent Technologies E5900B User Manual

Chapter 7: Configuring the Emulation Probe
Configuration items
To configure the Trigger Out SMB port
(All processors)
If you have an emulation probe, but you do not have an emulation module, use
the following table to configure the behavior of the Trigger Out SMB
connector on the front of the emulation probe.
If you have an emulation module, the trigger out behavior is always set to
monhigh for compatibility with intermodule triggering.
Trigger Out Configuration
Command
cf trigout=monhigh
cf trigout=monlow
cf trigout=fixhigh
cf trigout=fixlow
98 Agilent Technologies Emulation for the PowerPC 400/600/700
Emulation probe Trigger Out will be
Logic high when the processor is running in background.
(Default)
Logic low when the processor is running in background.
Fixed logic high.
Fixed logic low.