Remote Control; Inserting/Ejecting/Connecting Media; On First-Time Startup - Pioneer AVH-175DVD Owner's Manual

Basic operation

Remote control

1 2 3
8
7 4
9
5
6
1 Volume (+/–)
2 MODE Press to switch between the Application screen
and the AV operation screen.
Press and hold to switch to the camera view
mode.
3 SRC Press to cycle through all the available sources.
Press and hold to turn the source off.
4 TOP Returns to the top menu during DVD playback.
MENU
5 MENU Displays the DVD menu during DVD playback.
6 Thumb Selects a menu on the DVD menu.
pad
7 MUTE
8 AUDIO Changes the audio language, subtitle language
SUBTITLE or viewing angle during DVD playback.
ANGLE
9 BAND Selects the tuner band when tuner is selected
as a source.
Cancels the control mode of functions.
Switches between media file types when play-
ing the data of Disc, USB.
10 Return Returns to the specified point and begins
playback from there.
11 Pauses or resumes playback.
For audio: Press and hold to perform fast
or
reverse or fast forward.
For video: Press to perform fast reverse or fast
forward.
Press to return to the previous track (chapter)
or
or go to the next track (chapter).
Stops playback.
If you resume playback, playback will start from
the point where you stopped. Touch the key
again to stop playback completely.
12 FOLDER/P. Selects the next or previous disc or folder.
CH Recalls radio station frequencies assigned to
preset channel keys.
a
Inserting/ejecting/connecting
media
b
c
CAUTION
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
 Insert a disc into the disc-loading slot.
Ejecting a disc
 Press button to eject a disc.
Plugging and unplugging a USB stor-
age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
After a short pause, the splash screen comes on for a few
seconds.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touch
The top menu screen appears.
2
.
7