Ipower 9000 System - Polycom iPower 600 Installation Instructions Manual

Installing Version 6.2 Software on the iPower 900 or

iPower 9000 System

For iPower Release 6.2, you can upgrade the iPower 900 or 9000 system
software by downloading iPower_6_2_0_Update.exe from the Polycom
Web site (extranet.polycom.com).
Note: You can upgrade to iPower Version 6.2 software only if your
system is running software Version 5.x or higher. If your system
is running version 3.x or 4.x, you must first upgrade to version
5.x and then upgrade to 6.2. If you have version 2.x or earlier
(which uses Windows NT as its operating system), you must
reinstall the iPower software since Version 5.0 uses Windows 2000
as its operating system. See the section "Reinstalling the iPower
900 or 9000 System Software" for more information.
To reinstall the iPower 900 system software to version 5.0, use the boot
floppy and the two-CD set with part numbers 5151-50783-001/A and
5151-50784-001/A (model number 2200-51032-001). After doing this,
you will still need to upgrade to 6.2.
To reinstall the iPower 9000 system software to version 6.0, use the
two-CD set with part numbers 2151-50356-003/A and 2151-50357-
003/A (model number 2200-51033-001).
Before You Upgrade the iPower Software
Before you upgrade the iPower software to Version 6.2, make sure you do
the following:
1. Log on to the system with an account that has administrative rights.
If your system is set up for Auto Logon, use AdminTools to configure
the system to use Standard Windows Logon, and restart the system.
See the iPower Collaboration System Tips and Troubleshooting Guide
for details.
2. Download the software from the Polycom Web site
(extranet.polycom.com) to your local drive.
3. Ensure that you have at least 195 MB of free space on the C: drive.
4. Close all Windows applications, including any anti-virus software.
Upgrading the iPower 900 or 9000 System Software
This section contains information about upgrading your iPower 9000 or 900
system software to Version 6.2.
To upgrade iPower 900 or 9000 system software
1. Double-click iPower_6_2_0_Update.exe to start the upgrade, and
then follow the instructions on the screen.