GE Profile GVE Series Owner's Manual & Installation Instructions page 26

Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
REINSTALLING THE LEFT-HAND
5
AND RIGHT-HAND DOORS
WARNING
instructions, leaving off parts, or overtightening
screws, can lead to the door falling off and result in
injury and property damage.
1. Reinstall center hinge first and
(7.34 N-m) and small screw to
25 in-lbs (2.82 N-m). Rotating the
with mating surface will achieve
these torques.
2. Lower the refrigerator door onto the center hinge.
3. Securely tape the door shut with masking tape
or have a second person support the door.
4. Reinstallation is the reverse of the removal
instructions.
5. Be sure to reinstall the ground wire and strain relief
to the top hinge.
6. Reinstall hinge cover. NOTE: Ensure wires are not
pinched or under screw bosses before tightening
screws.
26
REMOVING CONVERTIBLE
6
DRAWER
1. Remove the convertible drawer basket by lifting
while rotating the basket upward.
convertible drawer.
over electric connectors on inside right of
the drawer frame. The cover hooks through
the drawer frame toward the inside of the
refrigerator.
Control Connection Cover
separate.
3. Remove 2 screws from each side of the frame with
4. Remove door by lifting off hooks.
Remove these screws
49-1000332 Rev. 4