Scan Button - Plustek OpticSlim M12 User Manual

1. SCAN Button

2. Custom Button
Each button launches a specialized utility. Default button settings are optimized
for most frequently scanning jobs, such as size, mode, resolution, ... You may,
however, change the settings as the methods described ibid to tailor your every scan
by accessing the DigiScan window.
To use the buttons, ensure you have installed the relevant software
(e.g., the printer driver is required for using the copy function)
beforehand.
Attention
S c a n B u t t o n
S c a n B u t t o n
The SCAN button can automate a scanning and proceed saving the scanned
image(s) to a destination file path, sending to a MAPI based E-mail programs (which
currently include Microsoft Outlook, Eudora, etc.), a printer or an image editing
software, depending on the settings you have defined for the SCAN button in the
DigiScan window.
To use the SCAN button, please follow the steps:
1. Make desired adjustment in Scan tab for the scanning purpose that the SCAN
button will execute later. (Please refer to the "DigiScan" section for more
information on adjustments.)
2. Insert the document, image or card face down into the scanner. Align the
paper or card to the arrow sign on the right of the scanner.
3. Press the SCAN button on the scanner. The scanning starts immediately.
4. If you have the "Continuous Scan" option checked, select E-mail or Copy from
the Purpose drop-down menu, and insert another document or image until you
have scanned all.
19